Search Our Support Knowledge Base
Find product articles and support information.
The BIOS is system software embedded inside your computer that helps the computer to start up and to set most of its hardware peripherals.
The initial function of the BIOS is to identify, test, and initialize system devices such as the video display card, hard disk, USB devices and other hardware.
The BIOS can normally be accessed when you start your computer. It usually requires the push of a function key, such as F1, F2 or F10, to get access to it. Sometimes it's not one of the Function keys, but the Delete or ESC keys.
For the most up to date information about your BIOS, please look for information provided by the BIOS manufacturer or the SATA controller manufacturer.
SOLUTION - Detecting the drive in the BIOS:
In most cases the SSD will be automatically detected by the BIOS. In some cases the BIOS will display the drive model number while in other cases it will only indicate the existence of a drive and its capacity.
SOLUTION - Drive is not detected by the BIOS:
There are fewreasons for not detecting a drive in the BIOS:
1. The SATA port is NOT enabled
2. A problem in cables or in connections
3. Faulty drive
SOLUTION - Enabling the SATA port:
If your drive is NOT detected it may be because it is turned OFF in System Setup. When you add a drive to the system, it may be needed to enable the port by turning it ON in System Setup.
In the sample below you can see how it is possible to enable or disable every SATA port by putting it OFF or ON.
SOLUTION - Problems in cables and connections:
In case of damaged SATA cables or connection the BIOS will not detect the drive. SATA connections are pretty gentle and might sometimes fall out their connections.
A good way to test a cable is re-plug it into the system and into the drive. If it still doesn't work try to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.In addition, if another drive is available, check this drive in the same system. This will help us understand if the problem is a drive problem or a system problem.
Details
| Answer ID | 39487 |
| Published | 09/14/2022 03:21 AM |
| Updated | 10/06/2022 03:27 AM |
Please rate the helpfulness of this answer
I am YouChat, an expert language model from You.com. I have access to a wide range of information and can provide assistance on various topics. I can help answer questions, provide insights, and engage in detailed discussions. I have a depth of knowledge and can provide evidence to support my claims. Let me know how I can assist you!
Now, let's dive into the information related to the concepts mentioned in the article you provided.
BIOS (Basic Input/Output System)
The BIOS is system software embedded inside a computer that helps the computer start up and set up most of its hardware peripherals. Its initial function is to identify, test, and initialize system devices such as the video display card, hard disk, USB devices, and other hardware.
Accessing the BIOS
To access the BIOS, you typically need to press a specific function key, such as F1, F2, or F10, during the computer's startup process. However, it can also be accessed using other keys like Delete or ESC, depending on the computer manufacturer and model .
Detecting the Drive in the BIOS
In most cases, the BIOS will automatically detect the SSD (Solid State Drive) or any other drive connected to the system. The BIOS may display the drive model number or indicate the existence of a drive and its capacity .
Drive Not Detected by the BIOS
If a drive is not detected by the BIOS, there could be a few reasons for it:
- SATA Port Not Enabled: The SATA port to which the drive is connected may not be enabled in the system setup. Enabling the port in the system setup (BIOS) can resolve this issue.
- Cable or Connection Problems: Damaged SATA cables or loose connections can prevent the BIOS from detecting the drive. Re-plugging the cable into the system and the drive or replacing the cable with a new one can help troubleshoot this issue .
- Faulty Drive: If the above steps don't resolve the issue, it's possible that the drive itself is faulty. Testing the drive in another system can help determine if the problem lies with the drive or the system .
These are some of the common solutions to address drive detection issues in the BIOS. It's important to note that the specific steps may vary depending on the computer manufacturer and model. For the most up-to-date and accurate information about your BIOS, it's recommended to refer to the documentation provided by the BIOS manufacturer or the SATA controller manufacturer .
I hope this information helps! Let me know if you have any further questions.
